1405 - 41 Street N. Lethbridge AB T1H 6G3403-327-8212

G2S

The NEW G2S Gravel Box

The Renn Generation 2 Square Gravel Box is a single wall body built from impact resistant HARDOX 450 plate, enabling the box to withstand the extreme abrasional wear of gravel.

HARDOX wear steel has a high and uniform hardness. This enables the steel to resist wear very effectively and hold much higher resistance to sliding wear than ordinary steels.

During tests, Hardox 450 showed significantly fewer dents and drop damage than regular steel. During the testing, it was repeatedly exposed to impacts from a 300 kg weight dropped from a height of 2 meters.

You will have a lighter box, higher payload, and a longer lasting RENN Body that will look great in years down the highway.

Standard Features & Specifications

HARDOX SINGLE WALL RENN G2S GRAVEL BOX

Model: GB DH15HSSL-G2S

PAYLOAD/CAPACITY: 12.75 c/yd
TARE: 3100lbs @ GB DH15HSSL-G2S

BOX SPECIFICATIONS

Overall width:____ 97.25”
Overall Height____ 55” (bottom of sill to top of gate)
Box Interior Width_ 87.25” OD
Box front: _______ 0.188″ AR200 – front panel
_______________ 54” high
_______________ Formed in one piece
_______________ Dog House – Greaseable trunnion (1.875″) blocks
Box Sides_______ Steel 4mm Hardox 450 – LH & RH box panels
_______________  34” Height
Upper sills: ______ Steel 4mm Hardox 450 – LH & RH formed beam channel
_______________ 5” high
Lower sills: ______ Steel 4mm Hardox 450 – LH & RH formed beam channel
_______________ 5” high
Floor___________ One Piece 4mm hardox 450 with 45 Degree Corners
TailGate: _______ Steel plate 4mm – Hardox 450 – End Gate Panel
_______________ Sloped tailgate – 48” high
_______________ Steel plate 4mm Hardox 450 – Top & Bottom Gate Sills
_______________ Greaseable 1-1/4” Hinge
Plank brackets: ___ 3 per side that accommodate 2×10 inch planks

Features

Air Operated Tailgate with Adjustable Latches
Heavy Duty One-Piece Wiring Harness
Three Year Warranty
Light-weight 4mm Single Wall/Floor design
Debris Shedding Side Walls
Greaseable Tailgate Hinges
Heavy Duty Spreader Chains

Options

  • Electric or Manual Tarp System
  • Low Front (48″)
  • High Front (60″)
  • Full or Partial Cab Shield
  • Aluminum Skirt Covers
  • Mud Flap Brackets
  • Body Vibrator
  • Floor Liner
  • Hardox 1/4″ 450 Upgrade
  • Walk Rails
  • Side Ladder
  • Manual High Lift—12” offset
  • 2” x 12” Side Boards—wood, steel or aluminum
  • Heavy Duty Asphalt Apron
  • Product Containment system
  • Shovel Holder
  • Broom Holder
  • Safety Props
  • Custom Paint
  • Hitch Flap
  • Underbody or Post Hoist
  • Flat Front or Dog House
  • Sloped or Straight Tailgate
  • High Lift Gate – Air or Hydraulic
  • 2 – Way (barn door) Tailgate
  • Tailgate Containment Seal & Lock
  • Middle Gate—load divider
  • Asphalt Chute
  • Plywood Sides
  • Pintle Hitch kits
  • Hydraulic Wet Kits
  • 12V Pneumatic control kits
Southland Trailers