1405 - 41 Street N. Lethbridge AB T1H 6G3403-327-8212

G2T

Hardox Gravel Box

The G2T Box

The Renn Tub Box is built from impact resistant HARDOX 450 plate, enabling the box to withstand the extreme abrasional wear of gravel.

HARDOX wear steel has a high and uniform hardness. This enables the steel to resist wear very effectively and hold much higher resistance to sliding wear than ordinary steels.

During tests, Hardox 450 showed significantly less dents and drop damage than regular steel. During the testing, it was repeatedly exposed to impacts from a 300 kg weight dropped from a height of 2 meters.

You will have a lighter box, higher payload, and a longer lasting RENN Body that will look great in years down the highway.

Standard Features & Specifications

Model: Gravel Box Tub – 100% Hardox

PAYLOAD/CAPACITY: 16.75 c/yd
TARE: 2700lbs @ GB DH16HSSL-G2 TUB

BOX SPECIFICATIONS
Overall width: 101”
Overall Height: 77-15/16” (bottom of sill to top of cab guard)
Box width: 97” OD
Box front: 0.188″ Hardox 450 – front panel
————– 59-1/4” high
————– Formed in one piece
————– Dog House w/trunnion 1.875″ blocks welded in
Box sides & floor: Steel 4mm Hardox 450 – LH & RH box panels
———————– 44-3/8” high
———————– 0.188″ Hardox 450 – LH & RH side support channels
———————– LH & RH fender mounting plates (3 per side)
Tailgate: Steel plate 0.188″ – Hardox 450 – end gate panel
———— Sloped tailgate – 52” high
———— Steel plate 0.188″ Hardox 450 – LH & RH tail panel
Upper sills: Steel 4mm Hardox 450 – LH & RH beam channel
—————————————————– 5” high
Plank brackets: 3 per side that accommodate 2×10 inch planks

Features

Air Operated Tailgate with Adjustable Latches
Heavy Duty One-Piece Wiring Harness
Three Year Warranty
Light-weight 4mm Single Wall/Floor design
Debris Shedding Side Walls
Greaseable Tailgate Hinges
Heavy Duty Spreader Chains
No Underbody Crossmembers or Sills

Options

  • Electric or Manual Tarp System
  • Low Front (54″)
  • Full or Partial Cab Shield
  • Aluminum Skirt Covers
  • Mud Flap Brackets
  • Reflex Coating
  • Body Vibrator
  • Floor Liner
  • Hardox 1/4″ 450 Upgrade
  • Air or Hydraulic High Lift Tailgate
  • 2 – Way (barn door) Tail gate
  • Walk Rails
  • Side Ladder
  • Manual High Lift—12” offset
  • 2” x 12” Side Boards—wood, steel or aluminum
  • Heavy Duty Apron
  • Product Containment system
  • Shovel Holder
  • Broom Holder
  • Custom Tool Box
  • Safety Props
  • Custom Paint
  • Hitch Flap
  • Underbody or Post Hoist
  • Flat Front or Dog House
  • Sloped or Straight Tailgate
  • 2 – Way (barn door) Tail gate
  • Tailgate Containment Seal & Lock
  • Middle Gate—load divider
  • Asphalt Chute
  • Walk Rails
  • Side Ladder
  • Safety Props
  • Plywood Sides
  • Pintle Hitch kits
  • Hydraulic Wet Kits
  • 12V Pneumatic control kits
Southland Trailers