1405 - 41 Street N. Lethbridge AB T1H 6G3403-327-8212

ET24T-45BT

Superior Design, Superior Strength

Heavy duty work takes a heavy duty trailer and with an engineered chassis that provides the best strength to weight ratio, Renn Highboy flatdecks can easily get the job done.

With a standard width of 108” and available in a tandem (24’) or tridem (24′ and 28’) configuration, and payload weights of up to 55,800 lbs. the Highboy Flatdeck is your best bet for all of your hauling needs.

Whether you’re hauling heavy machinery or a load of lumber, Renn’s Flatdecks get the job done safely.

Standard Features & Specifications

Flat Out, The Best There Is.

Model	Description	Payload Capacity	GVWR	Curb Weight	Length
ET24T-45BT	24 ft Highboy Pintle Tandem Dual Equipment Trailer	36800 lbs.	45000 lbs.	8200 lbs.	24’
ET24T-675BT	24 ft Highboy Pintle Tridem Dual Equipment Trailer	55800 lbs.	65000 lbs.	9200 lbs.	24’
ET28T-675BT	28 ft Highboy Pintle Tridem Dual Equipment Trailer8	54980 lbs.	65000 lbs.	10020 lbs.	28’

GENERAL SPECIFICATIONS

Dimensions: Deck Length 24’, Outside Width 9’, Overall Length 33’ (Owner must carry annual over-width permit)

Landing Gear: 2 – 12000lb Spring Loaded Extendable Landing Gear

Pintle Eye: Adjustable Pintle Eye, Forged, 100,000lb
Heavy duty Safety Chains & Hooks

Frame: 10” @ 30 WF Beam

Deck: 35” Deck Height
Floor- SPF Rough Plank Decking
8” Channel outside Frame
Full Rub Rail & Stake Pockets
3” Superlite I Beam Crossmembers
¼” Checkerplate over Wheels
10 Heavy Duty Recessed D-rings (5 Per side)

Beavertail: Full Width with Heavy Duty Ramps,
Grousers on Ramp, Beavertail, and Deck

Air System: Standard Air Tanks

Tires: 255/70R22.5 Cooper RoadMaster HH 220 On/Off Road

Rims: 22.5” x 8.25” Steel Powder-coated (inner & outer)

Data: Meets or Exceeds all Canadian Motor Vehicle Safety Standards

Suspension: IMT Spring Ride with Three 25,000lb Axles @ 96” Spread
17” Ride Height, 77 1/2″ Track Width
Stemco Wheel Seals, EP2 Lithium Greased Hub System

Brakes: 16.5″ x 7″ Extended Life Antilock Braking System
Bendix TABS-6 ABS (2 Sensors/1 Modulator)
Meritor Auto Slack Adjusters, Spring Brake Pots 30/30 TSE
23.75” Cam Length – IMT Wheel End Cast Hub and Drum