SL3300AR END DUMP

SL3300AR END DUMP

PRODUCT MODEL

Coating Frame: Complete Steel Shot Blasted, PPG DTM Urethane
Coating Box: Epoxy Primer Inside and Out, Top Coat PPG Urethane, All Painted Parts Baked in Heat Ovens
Safety: Reflective Tape
Lighting: HD Sealed Wiring Harness System, LED as per CMVSS with Side Signals
Tarp: Michels Gravel Guard –Manual Chain Drive, Hoops 12″ Standard
Fenders: Aluminum Checkerplate Front, 10 Gauge Steel Rear
Mudflaps: RENN Full Width Mudflaps at Rear and Front of Axles

The SL3300 is designed to take the most punishing work and provide the biggest payload without extra effort.

The 40 ton capacity hoist with five lift stages makes for faster offloading. Control and stability is provided by a beefy suspension with a 60” axle spread.

Because of the wide track and the HD 22,500 lb. axles, handling heavy loads is safer and more effective. For increased raised box stability the airbag system auto-dumps when the box is raised.

We built the box tough. The outer sides are formed with 12 gauge high tensile steel and the interior is designed with smooth slopes and corners. The floor is a solid one piece 3/16” plate that can handle the toughest loads.

Contact Information

For trailer inventory or sales inquires please use the DEALER LOCATOR.

1405 – 41 Street North
Lethbridge, Alberta
T1H 6G3
PHONE:
403-327-8212

You Might Also Like

Standard Features

Frame Engineered twin I Beam QT100
Brakes 16.5″ x 7″ Extended Life Antilock Braking System, Bendix TABS-6 ABS (2 Sensors/1 Modulator), Meritor Auto Slack Adjusters, Spring Brake Pots 30/30 TSE, 23” Cam Length – SAF Holland Wheel End Cast Hub and Drum
Tires Cooper RoadMaster 230 HH On / Off Road
Rims Steel Powder-coated (inner & outer)
Model 33′ Tridem End Dump with Air Ride Suspension
Box Dimensions OD Box Length – 34’: Overall Width 8’— Overall Height 118” — Box Height 37” –Top of Side Cap: ~29.2 yd/3
Landing Gear 2 Speed 64000lb Extendable Landing Gear
Air System Standard Air Tanks, Pressure Gauge, Manual Override Valve, Serviceable Inline Air Filtration System
Data Meets or Exceeds all Canadian Motor Vehicle Safety Standards
Suspension SAF Holland Air Ride with Three 23,000lb axles @ 120” Spread, 19” Ride Height, 77 1/2″ Track Width, Wheel Seals Stemco Guardian HP
Kingpin Set at 20”, Hardox 450 Coupler Plate 3/8″
Tub Box Double Wall with 12 Gauge AR200 Plate Inner Walls, 12 Gauge Formed HTS Outer Walls, Floor 3/16” AR200 formed up each side, 60” Sloped Front 10 gauge HTS, Full Length 10 Gauge Fender Skirts
Cylinder 45 Ton 5 Stage Telescopic High Mount 9.0” x 281” (40 imp gal), 1″ Female Quick Coupler at Front of Trailer
Ladders Ladder at back on D/S & P/S
Boards 12″ Side Boards, 10 plank brackets