Coating: Complete Steel Shot Blasted
Epoxy Primer Inside and Out
Top Coat PPG Urethane
All Painted Parts Baked in Heat Ovens
Colors: Black, White, Silver or Charcoal (custom colors available – see options)
Bumpers: Rear Light Bar
Document Holder: Included
Safety: Reflective Tape
Mudflaps: RENN Mudflaps at Front & Rear of Axles
Superior Design, Superior Strength
Heavy duty work takes a heavy duty trailer and with an engineered chassis that provides the best strength to weight ratio, Renn Highboy flatdecks can easily get the job done.
With a standard width of 108” and available in a tandem (24’) or tridem (24′ and 28’) configuration, and payload weights of up to 55,800 lbs. this Flatdeck is your best bet for all of your hauling needs.
Whether you’re hauling heavy machinery or a load of lumber, Renn’s Flatdecks get the job done safely.
For trailer inventory or sales inquires please use the DEALER LOCATOR.
|Frame||10” @ 30 WF Beam|
|Brakes||16.5″ x 7″ Extended Life Antilock Braking System Bendix TABS-6 ABS (3 Sensors/1 Modulator) Meritor Auto Slack Adjusters, Spring Brake Pots 30/30 TSE 23.75” Cam Length – IMT Wheel End Cast Hub and Drum|
|Tires||255/70R22.5 Cooper RoadMaster HH 220 On/Off Road|
|Rims||22.5” x 8.25” Steel Powder-coated (inner & outer)|
|Lighting||HD Sealed Wiring Harness System Rubber Mounted LED as per CMVSS with Side Signals|
|Overall Dimensions||Deck Length 28’, Outside Width 9’, Overall Length 36’ (Owner must carry annual over-width permit)|
|Landing Gear||2 – 12000lb Spring Loaded Extendable Landing Gear|
|Pintle Eye||Adjustable Pintle Eye, Forged, 100,000lb Heavy duty Safety Chains & Hooks|
|Deck||41” Deck Height Floor- SPF Rough Plank Decking 8” Channel outside Frame Full Rub Rail & Stake Pockets 3” Superlite I Beam Crossmembers ¼” Checkerplate over Wheels 12 Heavy Duty Recessed D-rings (6 Per side) Heavy Duty Tread Grousers on Ramp, Tail and Deck|
|Beavertail||Full Width with Heavy Duty Ramps, Grousers on Ramp, Beavertail, and Deck|
|Air System||Standard Air Tanks|
|Data||Meets or Exceeds all Canadian Motor Vehicle Safety Standards|
|Suspension||IMT Spring Ride with Three 25,000lb Axles @ 96” Spread 17” Ride Height, 77 1/2″ Track Width Stemco Wheel Seals, EP2 Lithium Greased Hub System|